How To Turn Cordless Impact Driver Into A Cordless Drill -In 6 Steps

How To Turn An Impact Driver Into A Drill in 6 Simple Steps

When it comes to power tools, I find that turning an impact driver into a drill is one of the most popular options for both DIYers and professionals like myself. Although they may look similar, there are some key differences between the two. An impact driver is primarily designed for driving screws and bolts, while a drill is specifically made for drilling holes. However, the idea of having the best of both worlds is intriguing. In this post, I’ll show you how to turn An Impact Driver Into A Drill. This is how I turn my cordless impact driver into a cordless drill, and you can do it too

How To Turn Impact Driver Into Drill: 6 Simple Stepss

Maybe it’s time to get a impact driver and hammer drill set. Check out the Best Impact Driver Drill Set .

How To Turn An Impact Driver Into A Drill in 6 Simple Steps

Turning an impact driver into a drill is straightforward with the right accessories. Here’s how to do it in six simple steps:

  1. Select the Right Adapter: Purchase a hex shank drill bit adapter. This adapter allows you to use traditional round shank drill bits with your impact driver.
  2. Insert the Adapter: Insert the hex shank end of the adapter into the chuck of your impact driver. Make sure it clicks into place and is secure.
  3. Choose Your Drill Bit: Select the appropriate drill bit for your task. Consider the material you’ll be drilling into and the size of the hole you need.
  4. Attach the Drill Bit: Insert the round shank of your drill bit into the adapter’s chuck. Tighten the chuck to ensure the drill bit is securely fastened.
  5. Adjust the Speed Setting (If Applicable): If your impact driver has adjustable speed settings, choose a lower speed for more control when starting to drill. You can increase the speed as needed once the hole is started.
  6. Start Drilling: Place the tip of the drill bit against your work material. Apply steady pressure and start the impact driver. Keep the tool straight and apply consistent pressure until you’ve drilled to the desired depth.

Remember, while an impact driver can be adapted for drilling, it’s primarily designed for driving screws. For extensive drilling, especially in hard materials, a dedicated drill might be more efficient. However, for light drilling tasks, this conversion can save time and space in your toolbox.

Understanding the Components

Before we dive into the conversion process, it’s important to understand the components of both tools. An impact driver has a hexagonal chuck that accepts hex-shanked driver bits. It also has a hammering mechanism that provides the torque needed to drive screws and bolts.

On the other hand, a drill has a keyless chuck that can accept a wide variety of drill bits. It also has a clutch that allows the user to adjust the torque settings to prevent overdriving screws or stripping screws.

Necessary Tools and Materials

To convert your impact driver into a drill, you will need the following tools and materials:

  • Drill chuck adapter
  • Chuck key
  • Allen wrench
  • Safety glasses

The drill chuck adapter is the most important part of the conversion process. It’s a small device that attaches to the impact driver’s hexagonal chuck and provides a keyless chuck for drill bits. You can find these adapters at most hardware stores or online retailers.

The chuck key is used to tighten and loosen the drill bits in the chuck, while the Allen wrench is used to tighten the adapter onto the impact driver’s chuck. Safety glasses are always important when working with power tools, especially when modifying them.

Watch This Video Now on How To Turn Cordless Impact Driver Into A Cordless Drill.

Suggested Reading: Why Woodworkers Don’t Use Impact Driver


My Personal Take: Impact Driver vs. Drill

In my journey with power tools, I’ve often found myself comparing the impact driver and the drill. Both are incredibly useful, but they each have their unique strengths, weaknesses, and ideal use-cases. Let me share my personal insights on these two tools.

Firstly, let’s talk about when to use each tool. I typically reach for my impact driver when I need to drive screws or bolts, especially into dense materials. The high torque output makes this task a breeze. On the other hand, when precision is key, such as when drilling holes, I find the drill to be my go-to tool. Its variable speed control allows for a more delicate touch.

Now, onto the advantages and disadvantages.

The impact driver, with its compact size and powerful torque, is excellent for heavy-duty tasks. However, its loud noise can be a downside, and it’s not as versatile as the drill. The drill, while not as powerful, offers more precision and versatility. It can handle a wide range of tasks, from drilling to mixing paint. However, it can be larger and heavier than an impact driver, which might be a disadvantage in tight spaces.

Lastly, let’s talk about cost. In my experience, a good quality drill tends to be less expensive than an impact driver. However, the cost can vary greatly depending on the brand, model, and features. It’s important to consider your specific needs and budget when choosing between these two tools.

Both the impact driver and the drill have their place in my toolbox. Understanding their differences helps me choose the right tool for the job, ensuring efficient and satisfying results in my DIY projects.

How To Turn Impact Driver Into Drill: 6 Simple Steps

Testing the Converted Tool

After you’ve converted your impact driver into a drill, it’s important to test it out to ensure it’s working properly. Try drilling a hole or driving a screw with the converted tool and compare its performance to that of a regular drill.

You may find that the converted tool doesn’t perform as well as a dedicated drill, especially when it comes to precision drilling or drilling into hard materials. However, for basic drilling tasks, the converted tool should work just fine.

Safety First: My Personal Precautions

When I’m working with power tools, I always prioritize safety above all else. Yes, the original post does touch on the importance of wearing safety glasses, but I believe that a more comprehensive approach to safety is necessary.

Firstly, handling power tools requires a certain level of care and attention. I always make sure to have a firm grip on the tool, ensuring it’s switched off before I make any adjustments.

I also take care to keep my workspace clean and free of any potential hazards that could cause accidents.

In the unfortunate event of an accident, it’s crucial to stay calm and act quickly. I always keep a first aid kit nearby when I’m working with power tools. If the injury is severe, don’t hesitate to seek immediate medical attention.

Finally, proper storage of tools after use is an aspect of safety that often gets overlooked. I make it a point to store my tools in a secure, dry place, away from the reach of children.

I also ensure that they’re switched off and unplugged, with any sharp or dangerous parts safely covered.

Remember, safety should never be an afterthought when working with power tools. It’s an integral part of the process that ensures we can enjoy our DIY projects without any unwelcome surprises


My Personal Troubleshooting Guide: Navigating Common Hurdles

In my experience, the process of converting an impact driver into a drill can sometimes present a few challenges. I’ve encountered a few common issues along the way, and I’d like to share my solutions to help you navigate these potential roadblocks.

One issue I’ve faced is the adapter not fitting into the impact driver. If you find yourself in this situation, my first piece of advice is to double-check the specifications of your tools. Ensure that the adapter is designed for your specific model of impact driver. If it’s the correct type and still doesn’t fit, it might be a manufacturing defect, and I’d recommend getting a replacement.

Another problem that can arise is the drill bit not being secure in the adapter. If this happens, make sure you’re tightening the chuck sufficiently. If the bit is still loose, it could be that the bit is not the right size for the adapter, or the adapter itself could be faulty.

In my case, I’ve found that investing in a high-quality adapter can save a lot of headaches down the line.

Lastly, there might be times when the converted tool doesn’t work as expected. If you encounter this, I’d suggest checking each component individually. Ensure the impact driver is functioning correctly, the adapter is properly attached, and the drill bit is secure.

If everything seems in order but the tool still isn’t performing well, it might be worth consulting with a professional or reaching out to the manufacturer’s customer service.

Remember, troubleshooting is a normal part of any DIY project. It’s all about patience, persistence, and a little bit of problem-solving. With these tips, I hope you’ll be able to overcome any hurdles you encounter during your conversion process.

Suggested Reading: Best Impact Driver Drill Under $50

My Safety Mantra: Prioritizing Protection

When I’m in my workshop, tinkering with power tools, safety isn’t just a consideration—it’s my mantra. Sure, the original post does remind us to wear safety glasses, but I believe there’s more to safety than meets the eye.

Firstly, handling power tools isn’t something I take lightly. I ensure I have a firm, steady grip on the tool, and I always make sure it’s switched off before I start making any adjustments. I also keep my workspace clean and clutter-free to avoid any potential mishaps.

In the unfortunate event of an accident, it’s crucial to stay calm and act swiftly. I always keep a well-stocked first aid kit within arm’s reach when I’m working with power tools. If the injury is severe, I don’t hesitate to seek professional medical help immediately.

Lastly, storing tools after use is an often overlooked aspect of safety. I make it a point to store my tools in a safe, dry place, out of reach of children. I ensure they’re switched off and unplugged, and any sharp or potentially dangerous parts are safely covered.

Remember, when it comes to working with power tools, safety isn’t just a precaution—it’s a necessity. It’s the key to ensuring we can enjoy our DIY projects without any unwelcome surprises.

FAQs How To Turn Impact Driver Into Drill: 6 Simple Steps

 Cordless impact drivers and cordless drills are both essential tools for DIY enthusiasts and professionals alike. However, sometimes you may find yourself in a situation where you need to use an impact driver as a drill.

This FAQ section will provide you with three common questions and answers on how to turn a cordless impact driver into a cordless drill.

Can you use an impact driver as a drill?

Yes, you can use an impact driver as a drill. However, you will need to attach a chuck adapter to the impact driver to hold drill bits. A chuck adapter is a small attachment that allows you to change out the bits quickly and easily.

What is a chuck adapter, and how do you attach it to an impact driver?

A chuck adapter is a small device that you can attach to your impact driver to turn it into a drill. You can find them at most hardware stores or online. To attach it to your impact driver, you will need to follow the instructions that come with the adapter. Typically, you will need to remove the impact driver’s hex shank bit holder and replace it with the adapter. Once the adapter is securely attached, you can insert your drill bit into the adapter and start drilling.

Are there any limitations to using an impact driver as a drill?

Yes, there are some limitations to using an impact driver as a drill. Impact drivers are designed to provide high torque for driving screws and bolts, but they may not provide the speed or precision required for drilling holes. Additionally, impact drivers may not be suitable for drilling into harder materials such as metal or concrete. If you need to drill into these types of materials, it is best to use a dedicated cordless drill.

Further Reading: When To Use Hammer Drill vs Impact Driver.

Conclusion on Turn Impact Driver Into Drill

Converting your cordless impact driver into a cordless drill is a great way to get more versatility out of your power tools. With a simple drill chuck adapter, you can turn your impact driver into a drill in just a few steps.

However, keep in mind that the converted tool may not perform as well as a dedicated drill, especially for more advanced drilling tasks. As always, be sure to wear safety glasses and follow all manufacturer instructions when modifying or using power tool.

More How To Resources :

Since you’re here check out some more how to based post

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *